Product Description: The connector is the connection between the bus and the bus, which can connect the current from the bus to the device, while ensuring the stable and safe transmission of the current.
Product features: 1. Composed of copper and aluminum, it has high electrical conductivity and good mechanical properties. 2. With independent and detachable features, and the same specifications of the connection head can be interchangeable, easy to install and maintain.
The connection method is as follows: 1. Insert the plug-in conductor into the busbar conductor. 2. Press the connector conductor and the connector needle using a wrench to ensure that the metal lock plate is in contact with each other. 3. Place the end face of the connector in the slot of the busbar, and secure the connector to the busbar using the internal and external nuts and screws.
Third, precautions
1. Before connecting the connector, ensure that the surface of the busbar conductor is clean to avoid affecting the electrical conductivity of the connector connection. 2. When connecting the joint, pay attention to press the metal lock plate and the joint pin to ensure a stable and reliable connection. 3. When installing the connector, pay attention to the internal direction and connection area of the connector to avoid incorrect installation of the connector. 4. After all busbar joints are connected, check the reliability and electrical conductivity of the joints in time to ensure electrical safety.
